RiderSite.com

Nooj · Posted: Mon Dec 26, 2011 12:54 pm Post subject: ACF-50

I have it if you want it. I'm an official retailer and only buy it from the UK importer, so it won't be an old bottle that's past it's use-by date.

A quart bottle is £35 including postage, or pick it up from me and save a fiver. it comes with a hand pump dispenser, so you won't run out of propellant while having half the product go to waste like you can with the aerosol cans.

PM or e-mail me to buy some, direct bank transfers preferred but can also do cheque, cash or PayPal.

_________________
SHINY BIKE SYNDROME Crash protection, puncture prevention, valeting and more.

randomsquid · Posted: Mon Dec 26, 2011 8:20 pm Post subject:

I've recently bought an aerosol or I would. I'll give you a shout when I run out though. Very good stuff.
_________________
Where ever I lay my hat.....

Nooj · Posted: Mon Dec 26, 2011 11:30 pm Post subject:

Put it on with a microfibre cloth or small paintbrush, then wipe as much of it off as you can with a clean cloth. What's left will be the right amount. Little and often, that's the key to keeping it working at it's best

_________________
SHINY BIKE SYNDROME Crash protection, puncture prevention, valeting and more.

Kwackerz · Posted: Mon Dec 26, 2011 11:47 pm Post subject:

I may buy some in a month or two. With other stuff going on I cant stretch to 30 quid on ACF just at the mo

A question though.. It's a penetrating oil? Ive a 1959 Mercian King of Mercia racing bike (pushbike) where the campagnolo solid aluminium seat stem has seized inside the steel frame... probably since not long after it was sold..

If I took the bottom bracket off and poured this ACF50 into the seat tube (bike upside down) do you think it would break the corrosion between the two? Obviously I cant tie you down to a definitive answer, thats impossible, but do you think genuinely it would be better to have a go with WD40 or is ACF50 better as a penetrant?
_________________
Never ride faster than your guardian angel can fly

RS Web RS Facebook RS Twitter

randomsquid · Posted: Tue Dec 27, 2011 1:04 am Post subject:

I'll give you an opinion and it's only that.

I tend to use ACF50 as my go to shit in a can now rather than WD40. I spray it, brush it or wipe it depending on what I want it to do. You know your own bikes and what they get up to. I'm guilty of using it as a quick fix for stuff I can't be arsed to do properly. I use it round the house on stuff too.

I used to x-ray stuff for a living, though I had tickets for and a working knowledge of other sorts of non destructive testing. One of my last jobs was on the gearbox housings of your new company motor. For the last 18 months I've been a pleb in the company corrosion labs. I know next to fuck all, but I'm picking it up. I've got a vague idea of why metal bits stop playing.

I've been using it on the ER6 for a few years. This is without a doubt the most badly finished bike I've ever owned. The forks started to pit within weeks and it needed a new loom within months. It lives outside and gets used all year round. The dealer claims it's the most abused example he's seen. Bunch of tossers. Using ACF50 on it I've reached a level of scruffy stasis with it if that makes sense.

In my experience it penetrates more than you'd expect and creeps less than you'd think. It stops rot more effectively than anything else I've tried.

The push bike thing might be asking a bit much. It would be my first try. But I'd be warming up the blow torch and polishing the mallets...

Just an opinion

_________________
Where ever I lay my hat.....

Nooj · Posted: Tue Dec 27, 2011 6:55 pm Post subject:

What he said

_________________
SHINY BIKE SYNDROME Crash protection, puncture prevention, valeting and more.

mangocrazy · Posted: Tue Dec 27, 2011 10:53 pm Post subject:

I've never really rated WD40 as a penetrating oil. In fact I think everything it does is done better by other liquids.

If you want a Water Dispersant and corrosion protector, ACF-50 is far and away the best.

If you want a penetrating oil, either PlusGas or Wurth Rost Off Ice are way better. Hell, even diesel is better.

If you're getting serious with corrosion, nothing much stands in the way of Heat, PlusGas/Rost Off and a BFH. (Big Fucking Hammer...)

Kwackerz · Posted: Tue Dec 27, 2011 11:45 pm Post subject:

Period Campag aluminium seat post (expensive..ish), Semi decent period frame.. Rules the BFH out of it, more gentle persuasion..
Heat has been tried unsuccessfully but cant go to town on it due to the brazed welds..

I'll give the Plusgas a try i reckon.. if that doesnt work I'll leave it where it is.
_________________
Never ride faster than your guardian angel can fly

RS Web RS Facebook RS Twitter

randomsquid · Posted: Wed Dec 28, 2011 12:33 am Post subject:

There was some marine stuff the yanks swear by for penetrating rusty bits. I'll see if I can find it again. I needed to get the remains of some exhaust nuts off, but went with the warm it up a bit and hammer a socket on approach.
_________________
Where ever I lay my hat.....

randomsquid · Posted: Sat Dec 31, 2011 8:56 pm Post subject:

Kwackerz · Posted: Sat Dec 31, 2011 9:49 pm Post subject:

Cool, cheers for that, I'll have a shooftie on Amazon then

_________________
Never ride faster than your guardian angel can fly

RS Web RS Facebook RS Twitter